February 2022: How it all started...



It was February 2022 when we read about the Class Globe 5.80 in the Dutch sailing magazine “Zeilen”. It was the story about the maiden voyage of hull number 78, as was built by Pim van den Brink from the Kolibri-jachtbouw company (the official supplier of the building kits in the Netherlands). 
After reading the article, we both knew that this was the perfect project for us and soon afterwards we visited Pim in his workshop. 
Pim gave us a tour and showed us how the CNC cut building kits were made and how the the different kinds of building materials looked. We were absolutely stoked about the idea of sailing the seas with our own hand-crafted boat, so as soon as we came home we ordered the plans!










Reacties

Een reactie posten

Populaire posts van deze blog

November 2022: Gluin' and Glassin'

Afbeelding
After dry fitting de panels, we removed all of the panels from the hull. Taking the boat apart after closing the hull felt more like a step back rather than forward, but of course this was necessary in order to glue the panels. First, we applied two layers of epoxy on the inward facing side of the panels. After sanding and cleaning, we glued and screwed to panels back on.  Next step was gluing the second bottom layer on top (or bottom actually) after which we beveled this layer. After we finished beveling the edged, we were quite glad that for now planing is done for a while… We then mounted the butt blocks and sanded the hull. We rounded the sharp edges of the hull, so that applying the glass fiber without air trapping would be easier. Last step before we could start glassing the hull, was to mount the stem cap and shape the rounding of the bow. It was really nice to see the definitive hull shape after this step! So, glassing the hull then! We both never worked with glass fiber be...
Meer lezen

July 2022: Building the jig and setting up the frames

Afbeelding
We were still in doubt where to set up the jig and construct the actual boat. We have a garage attached to our house, but with a length of just above 6 meters and a door width just under 3 meters it is not that specious for building a Class Globe 5.80. In addition, in order to fully use this 6 x 3m, we would have had to remove a radiator, storage cabinet and rearrange the racks inside the garage. On the other hand, if we were able to build it in our garage, we could just go and continue building the boat at every spare moment.  After measuring the garage again and thinking out other options (e.g. building the boat inside a tent in the garden), we decided that the garage would be the best place for building our Class Globe. We decided to put the jig on wheels so we could move it around a bit in the limited space and, not totally unimportant, to get the boat out of the garage once it is finished.   We had to be quite inventive for setting up the supports for the S-frame in the c...
Meer lezen

December 2022: setbacks and sickness

Afbeelding
After glassing the hull in November, we planned to flip the boat before the 1st of January 2023. Unfortunately, this didn’t work out as planned…  In the days after we finished glassing, we noticed that on two areas on the hull the epoxy did not dry as expected. At first, we thought that this was probably due to the cold weather and so we thought that the problem would probably fix itself in the next couple of days. Of course, this was just wishful thinking since we used winter-epoxy and temperatures in the shed were above minimum requirements. So, after a couple of days, we had to conclude that something went wrong. In retrospect, we think there was one portion (about 1 kilo) of epoxy in which, instead of winter-hardener, we put epoxy from another small container. We were pretty bummed about it, since the glassing went so well! There was no other option than removing all of the wet glass, sanding the hull down to the hardened parts and applying two new layers of 600gr/m2 glass fibe...
Meer lezen